What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 29.06.2025 05:14

What is lightning?
At least they know the answer if they wanted it.
2024–10–10[John johnson John Johnson ]
There are three different concepts here that are getting confused.
A fuse is a non-resetable over current circuit protector.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This one hit behind the barn.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
First-round pairings for NASCAR Cup In-Season Challenge are set - NBC Sports
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What does it mean when we dream about demons, ghosts, monsters, etc.?
A circuit breaker is similar, but is resettable.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is where the MOV conducts again, and dissipated the energy.
How much gold is there in the world? - Live Science
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Which is the better research AI than Chat GPT?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Here is a simplified AC power diagram.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Major US retailers cancel Nintendo Switch 2 pre-orders - GamesIndustry.biz
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
the problem then depends on "how fast does the fuse operate?".
The third is lightning and “how it gets conducted into a home.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
but I think this circuit , shows a few more pieces.
He then asserts :
Why are the democrats keep insisting that there are more than two genders?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes the function of a fuse.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
New model helps to figure out which distant planets may host life - Phys.org
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It also is a device that limits the change in current flow.
Google, Meta and Snap think this tech is the next big thing - CNN
There are two important concepts here.
One is “what exactly is in a ‘surge protector’ ? ”
what exactly is a ‘surge’ protector?
Poop Transplants Not All They’re Cracked Up to Be - Gizmodo
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The bolt then partially travels down the line to your home.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Can ancient music sound modern?
First Sentence:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
‘Elio’ Is A Box Office Disaster, Pixar’s Lowest Opening Of All Time - Cartoon Brew
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
eight
An AC voltage/ current source, and an ac inductive load.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is 'the assistant's answer'
Because the load is inductive, the current lags the voltage.(by a bit).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.
Edit 2024–10.
so, what happens?
These are simplified answers to the original question, and does not change anything I wrote above.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, the voltage could go up to 500 volts, and the fuse will not open up.
These devices are installed between the “hot” and “neutral” and protective ground.
Barnstars:
But… the neutral is now “floating” because of the 1 ohm resistance.
Now when you have a certain ac resistance, then a current flows in a loop.
What does a fuse do?
But it can get overloaded, and no longer works.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
For this case there are devices called Metal oxide varistors (MOV).
nine
2024–10–16 [ OO OLAOYE OYEBODE ]
[image of Common-mode choke]
He then describes Rainy Season and Lightning.
One
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It seems Mohan does not understand the difference between a comment and an Answer.
[old diagram got deleted by accident]
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
I post the exact comment here.
a photo is worth a thousand words.
In schematic diagrams this is the symbol for a fuse:
The other is “what does a “fuse” do?”